Busqueda Avanzada

Por palabra Por código Mirax

Ver carro de compras | ¿Cómo comprar?
Visite el sitio web de Mirax Argentina

Nuestros precios son IVA incluido

• Home
• Notas técnicas
• Manuales
• Videos
• Consultar despachos

Haga click aquí para agrandar la imagen

Here are some of the key features that make Futaba’s 2.4GHz system superior:


While other 2.4GHz radios lock onto one or two frequencies, the FASST system occupies each individual frequency for only 2 milliseconds before moving on, so interference is virtually impossible.


This sophisticated technology looks ahead for potential problems when scanning incoming data and applies error correction - resulting in a solid, impenetrable connection between you and your model.


By seamlessly selecting the best reception between two receiver antennas, the FASST system lets you fly with no fear of loss of signal, regardless of your aircraft’s attitude.


The transmitter comes with a unique, permanent ID code that is preset at the factory. Pushing the Easy Link button locks the receiver to your transmitter using that code. It\'s the only code that it will recognize - and with over 134 million possible codes, there’s no chance of a signal conflict.


--------------------------------------------------------------------------------

The heart of the FASST system: the compact, all-in-one R606FS receiver.


No other 2.4GHz system boasts a receiver like the incredible R606FS. You can see how small it is, and it weighs just 7 grams without the case, so it\'s perfect for park flyers. But this same receiver is powerful enough for giant-scale airplanes as well. It’s the best of both worlds...small size AND full-range performance!

And that\'s not all...
With only one receiver unit, the R606FS can be installed without making any airframe modifications. Other 2.4GHz systems require a second receiver be mounted up to six inches away, and at a 90° angle.
The competition’s two-piece receiver means two additional connection points, doubling the potential for a problem.
The R606FS uses rubber grommets to minimize stress on the antennas; the competition’s doesn’t, which can cause the antenna wire to become frayed.
Custom-developed IC chips
No off-the-shelf circuitry here! R/C flying demands “purpose-built” IC chips - as only Futaba, with almost 15 years of experience and R&D in spread spectrum technology, can provide.



--------------------------------------------------------------------------------

Other 2.4GHz FASST system benefits:

Convenient, worry-free operation
Thanks to Futaba quality and reliability, you can fly anywhere - R/C airfield, neighborhood park, schoolyard - without concern for signal conflict or frequency pins!

A one-touch Fail Safe system
The 6EX 2.4GHz’s Fail Safe is programmed right through the transmitter, just like on conventional systems. Other 2.4GHz radios require a complicated six-step process, along with a separate binding plug that can easily get lost.

Higher sensitivity
Even at great distances you’ll stay in complete control of your model - while also enjoying greater signal selectivity that helps prevent unwanted interference.

Servo flexibility
By not including servos, the 6EX 2.4GHz lets you configure the system to meet your specific needs. Even better, the system is compatible with all Futaba servos.

A great low price!
You get all this, at a price that makes the 2.4GHz FASST system the absolute best value in a full-range R/C system.

Standard Programming Features:
Trainer function-transmitter can be master or student, compatible
with other Futaba systems
Six model memory
Servo reversing
End point adjustment
Airplane or heli programming
Dual Rate /Exponential for ailerons, rudder and elevator
Fail Safe-safety throttle setting in case of transmitter signal
loss
Battery Fail Safe-safety throttle setting in case of signal loss
Stick Mode-Choose from Mode 1-Mode-4
Changeable Throttle Stick-ratchet for airplanes or smooth for helis
Adjustable Stick Length

Airplane Features;
Programmable Mixing (1 & 2) any two channels can be combined
Pre-Programmed Throttle Cut for safely shutting off engine
Wing mixing for flaperon, flap trim, V-tail and elevon

Helicopter Functions;
Three swashplate types
Five-Point Normal and Idle Up Throttle/Pitch Curves
Revo, Gyro and Swash to Throttle mixing
Swash AFR Adjustable Function Rate for use w/ 3S or 3E swash types

INCLUDES: Futaba 6EX Transmitter
NT8F700B 9.6V 700mAh Transmitter Battery, FUTM1462
Battery Charger, FUTM1830
R606FS Receiver, FUTL7635
SWH-13 Switch Harness, FUTM4370

REQUIRES: Servos and receiver battery depending on type of aircraft

SPECS: Transmitter;
Power Supply: 9.6V
Current Drain: 170mA

Receiver;
Size: 1.6 x 1.1 x 0.35 (40 x 27 x 9mm)
Power Requirement: 4.8 - 6V
Current Drain: 80mA (at no signal)
Weight: 0.35oz (10g) with case
0.25oz (7g) without case

This is the Futaba 6EX Transmitter and R606FS 6-ch Receiver with the 2.4GHz FASST system. Full Range System-Ideal For All Types of R/C Aircraft Including Park Flyers.

FEATURES: Futaba's FASST (Futaba Advanced Spread Spectrum Technology) shifts every two milliseconds virtually eliminating signal conficts and interruptions unlike other 2.4GHz systems that only stay on one or two frequencies R606FS high sensitivity receiver weighs only 0.25oz (7g) without case yet is a full range system for all aircraft from giant scale to Park Flyer applications-no need to buy separate receiver for specific aircraft rubber grommets installed where antennas exit to eliminate stress and fraying of the wires Dual antenna diversity enables FASST system to automatically and seamlessly select the best reception between the two antennas built into the receiver ensuring that the aircraft stays under constant control of transmitter regardless of altitude Pre-Vision Packet Screening technology scans incoming data for potential problems and applies sophisticated error correction techniques for solid impenetrable link with model Easy Link system features a unique ID code in the transmitter that links to the receiver insuring that receiver only follows commands from this transmitter-with over 134 million possible codes there is no chance for a conflict No hassle Fail Safe programmed through transmitter-no complicated set-up steps or binding plugs When performing a ground check, the Power Down function allows modeler to reduce power from up to 50+ paces away-like retracting the antenna on a conventional transmitter Purpose built custom IC chips for key functions; no off-the-shelf IC chips One year limited warranty

Standard Programming Features: Trainer function-transmitter can be master or student, compatible with other Futaba systems Six model memory Servo reversing End point adjustment Airplane or heli programming Dual Rate /Exponential for ailerons, rudder and elevator Fail Safe-safety throttle setting in case of transmitter signal loss Battery Fail Safe-safety throttle setting in case of signal loss Stick Mode-Choose from Mode 1-Mode-4 Changeable Throttle Stick-ratchet for airplanes or smooth for helis Adjustable Stick Length

Airplane Features; Programmable Mixing (1 & 2) any two channels can be combined Pre-Programmed Throttle Cut for safely shutting off engine Wing mixing for flaperon, flap trim, V-tail and elevon

Helicopter Functions; Three swashplate types Five-Point Normal and Idle Up Throttle/Pitch Curves Revo, Gyro and Swash to Throttle mixing Swash AFR Adjustable Function Rate for use w/ 3S or 3E swash types

INCLUDES: Futaba 6EX Transmitter NT8F600B 9.6V 600mAh Transmitter Battery, 67092 FBC-19B(4) Battery Charger, 67112 R606FS Receiver, FUTL7635 Switch Harness-J Style Connector, 67325 Neck Strap

REQUIRES: Servos and receiver battery depending on type of aircraft

SPECS: Transmitter; Power Supply: 9.6V Current Drain: 170mA

Receiver; Size: 1.6 x 1.1 x 0.35" (40 x 27 x 9mm) Power Requirement: 4.8 - 6V Current Drain: 80mA (at no signal) Weight: 0.35oz (10g) with case 0.25oz (7g) without case

3/21/07