FEATURES: Construction: Blow molded plastic fuselage Wing: One-piece, constructed of balsa with built-in polyhedral for increased stability, two plywood wing joiners, wings attach to fuselage with rubber bands and are covered with high-quality heat shrink film Radio Compartment: Accessible under canopy and will accept standard size servos Canopy: Single, molded tinted plastic Tail Design: Built-up balsa covered in high-quality heat shrink film Motor: 540 size with pre-installed leads Propeller: Hardened black plastic, two piece folding design Spinner: 1-3/4" (45mm) diameter, plastic, black in color Battery: 1800mAh 8-cell NiMH, 9.6V with Standard connector Ready to fly in 3-4 hours Warranty: Hobbico guarantees this kit to be free from defects in both materials and workmanship at the date of purchase

INCLUDES: One Hobbico Upstar 2M glider with 540 size motor, folding propeller, 1800mAh battery pack, electronic speed control, pushrods, hardware, illustrated manual, decals and rubber bands

REQUIRES: Radio: 3-channel with two standard servos AA Batteries: Eight batteries for radio Battery Charger: NiMH compatible, 68857

SPECS: Wingspan: 68" (1725mm) Wing Area: 462 sq in (29.8 sq dm) Weight: 2.75 lb (1247 g) Wing Loading: 13.7 oz/sq ft (42 g/sq dm) Center of Gravity (CG): 2-1/2 (64mm) back from leading edge of wing at fuselage side Control Throws; High Rate Low Rate Elevator (Up and Down) 3/8" (10mm) 1/4" (6mm) Rudder (Right and Left) 7/8" (22mm) 9/16" (14mm)

4/19/06 updated rda 5/24/06