Fotos Adicionales: Foto 1 Foto 2 Foto 3
Manuales del Producto: Parte 1



Recomendar este producto a un amigo

FEATURES: Construction: FlightFlex EPP (Expanded Polypropolene) enables plane \r\n to keep flying even after most crashes \r\n Trim Scheme: Yellow, Red, White and Blue \r\n Wings: One piece Flight Flex Foam construction with foam ribs and \r\n carbon fiber tube reinforcement \r\n Motor: 370 size with ball bearings and 5:1 gearbox preassembled \r\n (50 tooth spur and 10 tooth pinion) \r\n Aileron Control: Dual Servo \r\n Hardware: Complete hardware included \r\n Propeller: 11x4.7 (GPMA2786) with aluminum prop saver (GPMQ4620) \r\n Building Time: Ready to fly in 2-3 hours \r\n Cowling: FlightFlex construction \r\n \r\nINCLUDES: Fuselage, main wing, cowling, motor and gear box, prop, prop saver, \r\n hardware package, and photo illustrated instructions \r\n \r\nREQUIRES: Radio: 4-channel with micro receiver \r\n Servos: 4 micro size (9g or less) \r\n 6\" Servo Extension: Two required - HCAM2000 (for aileron servos) \r\n 12\" Servo Extension: Two required - HCAM2100 \r\n Y-Harness: Standard Y-Harness HCAM2500 (For aileron Servos) \r\n Speed Control: 25A - GPMM2025 (you will have to install a male Dean\'s\r\n battery plug onto this esc to match the battery pack - WSDM1302) \r\n Battery: 3S 11.1V 1200-1500mAh Lithium Polymer \r\n Charger: Designed for charging Lithium Polymer packs \r\n Building and field equipment: Low Temp. Glue Gun and glue sticks and \r\n other miscellaneous equipment - WOOU1445 and WOOU1446 \r\n \r\nSPECS: Wingspan: 34.5\" (875mm) \r\n Wing Area: 352 sq in (22.7 sq dm) \r\n Weight: 14-16oz (397-454g) \r\n Wing Loading: 5.7-6.5 oz/sq ft (17-20g/sq dm) \r\n Length: 38\" (965mm) \r\n

This is the electric powered, radio controlled, Almost Ready to Fly Great Planes Yak 55 3D 3D Aerobatic Park Flyer Airplane.

FEATURES: Construction: FlightFlex EPP (Expanded Polypropolene) enables plane to keep flying even after most crashes Trim Scheme: Yellow, Red, White and Blue Wings: One piece Flight Flex Foam constrution with foam ribs and carbon fiber tube reinforcement Motor: 370 size equipped with ball bearings and 5:1 gearbox pre- assembled (50 tooth spur and 10 tooth pinion) Aileron Control: Dual Servo Hardware: Complete hardware included Propeller: 11x4.7 (68551) with aluminum prop saver (69194) Building Time: Ready to fly in 2-3 hours Cowling: FlightFlex construction

INCLUDES: Fuselage, main wing, cowling, motor and gear box, prop, prop saver, hardware package, and photo illustrated instructions

REQUIRES: Radio: 4-channel with micro receiver - FUTJ37** Servos: 4 micro size (9g or less) - 50983 6" Servo Extension: Two required - 3959 (for aileron servos) 12" Servo Extension: Two required - 2562 Y-Harness: Standard Y-Harness 2563 (For aileron Servos) Speed Control: 35A - 49872 (you will have to install a male Dean's battery plug onto this esc to match the battery pack - 47619) Battery: 3S 11.1V 1200-1500mAh Lithium Polymer - 33889 Charger: Designed for charging Lithium Polymer packs - 30140 Building and field equipment: Low Temp. Glue Gun and glue sticks and other miscellaneous equipment - 81094 and WOOU1446

SPECS: Wingspan: 34.5" (875mm) Wing Area: 352 sq in (22.7 sq dm) Weight: 14-16oz (397-454g) Wing Loading: 5.7-6.5 oz/sq ft (17-20g/sq dm) Length: 38" (965mm)

COMMENTS: The manual lists the incorrect pinion gear. The correct pinion gear is 68609.

For a possible brushless motor you can use 80650.

7/18/05 kpm 11/22/05 updt wm 12/09/05 updt 02/06/06 updt rda 10/02/06