GREATPLANES GPMA1550 EDGE 540 E-PERFORMANCE SERIES 3D ARF ha sido agregado al carro de compras.

Ir al carro


Código: 102760

El precio se definirá cuando llegue
Producto agotado


This is the electric powered, radio controlled, almost ready to fly
ElectriFly Edge 540 3D Aerobatic Airplane.
Park Pilot Program Legal Aircraft
This Edge 540 3D is part of the ElectriFly E-Performance Series.
For intermediate to experienced flyers 14 years of age and older.

FEATURES: Construction: Balsa and ply with prehinged ailerons and rudder and
airfoiled control surfaces, motor box preinstalled with blind nuts
providing perfect spacing for spinner backplate-no need for
measuring, cowl ring also preinstalled
Wings: Two piece with carbon fiber wing joiner and single screw
Motor Mount: Built-up plywood
Covering: Top Flite MonoKote
Aileron Control: Dual servo
Cowl: Prepainted fiberglass, attaches with rare earth magnets
Canopy: Clear, single
Wheel Pants: Prepainted ABS
Landing Gear: Prepainted aluminum 0.079" (2mm) thick
Wheels: Two foam 1.75" (44mm) diameter
Spinner: Red plastic, 1.75" (44mm) diameter
Hardware: Full set included
Building Time: Approximately 4-6 hours
Warranty: Great Planes Model Manufacturing Company guarantees this
kit to be free from defects in both materials and workmanship at
date of purchase.

INCLUDES: ElectriFly ARF Edge 540 3D Aerobatic Airplane with fiberglass cowl,
ABS wheel pants, landing gear, wheels, hardware, photo-illustrated
instruction manual and two decal sheets

REQUIRES: Radio: 4 channel
Servos: 4-micro
Dual Servo Extension: For aileron servos
6" (150mm) Slim Extension Wire: Two
16" (400mm) Servo Extension: Two
Motor: Rimfire 35-30-1250 outrunner
35A ESC for Brushless Motors:
Battery: LiPo 1500mAh 11.1V
Cell Balancer: For LiPo battery,
Battery Charger: LiPo compatible
Propeller: 10x7E

SPECS: Wingspan: 41" (1040mm)
Wing Area: 353 sq in (22.9 sq dm)
Weight: 29 - 32.0 oz (820 - 910g)
Airfoil: Fully symmetrical, mid wing placement
Wing Loading: 11.8 - 13.1 oz/sq ft (36 - 40 g/sq dm)
Length: 39.5" (1005mm)
Center of Gravity: 2-1/2" (64mm) back from the leading edge of the
wing at the side of the fuselage

Control Throws- Low Rate High Rate 3D
Elevator: 1/2" (13mm) 8° 1-1/8" (29mm) 19° 2-1/4" (57mm)40°
Rudder: 2" (51mm) 19° 2-3/4" (70mm) 27° 3-3/4" (94mm)39°
Ailerons: 5/8" (16mm) 11° 1-1/8" (29mm) 20° 1-3/4" (44mm)33°

COMMENTS: Following are the MonoKote colors used on this model and stock
numbers for six foot rolls;
Metallic Blue TOPQ0402 Missile Red TOPQ0201
Yellow TOPQ0203 White TOPQ0204

Próximos embarques a llegar a Mirax Hobbies