TOPFLITE TOPA 0905 BEECHCRAFT STAGGERWING ARF ha sido agregado al carro de compras.

Ir al carro


Código: 88809

El precio se definirá cuando llegue
Producto agotado


Envergadura: 1840 mm
Largo: 1610 mm
Motor: 25 cc gas

This is the radio controlled, glow powered, Almost-Ready-to-Fly,
Top Flite Beechcraft Staggerwing GS Scale Biplane.
For Intermediate to Advanced Modeler/Fliers.

FEATURES: Construction: Fiberglass fuselage and wing struts, fuselage is
detailed with rivets and panel lines, elevator and rudder linkages
are mounted internally to preserve scale appearance
Wings: Built-up, breaks down into four parts for easy transportation,
sections plug into aluminum joiners for quick assembly without
having to disconnect the pneumatic lines
Covering: Top Flite MonoKote, Dark Red (TOPQ0218)
Radio Compartment: Plywood reinforced
Cowling: Constructed of fiberglass
Canopy: Clear
Landing Gear: 0.20\" (5mm) diameter fixed wire included, set up for
Robart scale landing gear (not included, see COMMENTS), operational
main gear and tail wheel doors
Wheels: Main- 4\" (101mm) diameter, constructed of foam
Tailwheels- 1-1/4\" (32mm) if tail wheel doors are used
2\" (51mm) if doors are not used
Aileron Control: Dual servo
Flap Control: Dual Servo
Rudder Control: Pull-pull cable system
Spinner: 2-3/4\" (70mm) aluminum
Dummy Radial Engine: Molded plastic, white in color
Cockpit Interior: Painted pilot bust and instrument panel decal
Fuel Tank: 24oz (720cc), approximate
Building Time: Ready to fly in several hours.
Warranty: Top Flite Models guarantees this kit free of defects
in material and workmanship at the date of purchase. This warranty
does not cover any component parts damaged by use or modification.

INCLUDES: Pre-built and covered wings, fuselage and tail assemblies, pushrods,
fixed wire landing gear, aluminum spinner, dummy radial engine,
two main wheels, two tail wheels, two-piece nylon engine mount,
fuel tank, plywood servo and retract trays, aluminum wing joiners,
hardware package, instrument panel decal, painted pilot bust,
and photo-illustrated instructions

REQUIRES: Engine: 1.60 cu in (25cc) 2-stroke
OR 1.60 cu in (25cc) 4-stroke
Muffler: Pitts type (BISG4116) for 2-stroke OR
Flex Pipe (OSMG2672) for 4-stroke
Radio: 6-channel minimum with seven servos OR
8-9 channel radio with 9 servos if retracts are desired
Servos: Six with at least 54 oz-in torque (2-tail, 2-flaps, 1-rudder,
1-elevator) One standard (42 oz-in torque) for throttle
6\" (152mm) Servo Extensions: Two for flaps
12\" (305mm) Servo Extensions: Two for ailerons
Y-Harness: Two
Flight Battery: 1000mAh or greater
Misc. Items: Glow plug, 1/2\" foam rubber padding, medium fuel tubing,
fuel filter, propeller, building and field equipment.

SPECS: Wingspan: 72.5\" (1840mm)
Wing Area: 1525 sq in (97.6sq dm)
Weight: 17 - 19lb (7710 - 8620g)
Wing Loading: 26 - 28oz/sq ft (80 - 90g/sq dm)
Length: 63.5\" (1610mm)
Airfoil: Semi symmetrical
Center of Gravity: 5-1/2\" (140mm) on top of bottom wing at fuselage
Control Throws- High Rate Low Rate
Elevator: Up & Down 3/4\" (19mm) 1/2\" (13mm)
Rudder: Right to Left 1-1/2\" (38mm) 1\" (25mm)
Ailerons: Up & Down 3/4\" (19mm) 1/2\" (13mm)
Flaps: Up & Down 1-3/8\" (35mm) 1\" (25mm)

COMMENTS: For a Robart Main Gear Retract system made specifically for this
airplane order ROBQ0536.
Also required is an Air Valve Kit, ROBQ2302
Pressure Tubing, ROBQ2369
Scale Retract Tail Wheel ROBQ2210
Heavy Duty Servo, FUTM0035

Próximos embarques a llegar a Mirax Hobbies