0

GREATPLANES GPMA 1580 E-PERFORMANCE SERIES 3D REACTOR BIPE ARF ha sido agregado al carro de compras.

Ir al carro

GREATPLANES GPMA 1580 E-PERFORMANCE SERIES 3D REACTOR BIPE ARF

Código: 97348

El precio se definirá cuando llegue
Producto agotado
Descripción

GREATPLANES GPMA 1580 E-PERFORMANCE SERIES 3D REACTOR BIPE ARF

Avion para motor electrico.
Construido en balsa cortada por laser.
Envergadura: 890mm.
Peso: 970 – 1085gramos.
Largo: 1080mm.
Perfil simetrico.


.
This is the radio controlled, electric powered almost-ready-to-fly
Great Planes ElectriFly E-Performance Reactor Bipe Sport Aerobat Airplane.
Ideal for 3D and Pattern Fliers.

FEATURES: Construction: Laser cut balsa and ply
Wings: Balsa and plywood construction with ailerons on both wings
with front and rear joiners
Covering: Factory applied Top Flite MonoKote (see comments for color)
Cowl: Factory painted fiberglass construction
Canopy: Tinted polycarbonate construction with silver trim
Battery Port: Located on underside of nose, hook and loop strap holds
battery in place and allows fast and easy changes
Spinner: 1.5" (37mm) diameter white plastic construction
Landing Gear: Factory painted composite construction
Wheels: 1.75" diameter
Wheel Pants: Factory painted fiberglass construction
Aileron Control: Dual servo
Carbon fiber pushrods
Composite nylon control horns and servo arms
Decals: Die-cut and ready to peel and stick
Laser cut plywood CG balancer for easy model balancing
Building Time: Ready to fly in 4-6 hours
Warranty: Great Planes Model Manufacturing Company guarantees this
kit to be free from defects in both materials and workmanship at
the date of purchase.

INCLUDES: Pre-built and covered wings, fuselage and tail assemblies, pushrods,
fiberglass cowl, wheel pants, molded composite main gear, 1.6"
(41mm) diameter foam main wheels, 1.5" (37mm) diameter spinner,
hardware package and photo-illustrated instructions

REQUIRES: Radio: 4-channel with micro receiver
Servos: Four micro, Futaba S3114 Digital Micro High-Torque
recommended
12" (300mm) Servo Extension: Two
Y-Harness: One
Motor: Outrunner brushless
Electronic Speed Control: 35A brushless compatible
Battery: 11.1V LiPo, at least 1200mAh
Battery Charger: LiPo compatible with balancing capability or
separate balancer
Propeller: 11x7
Building and field equipment

SPECS: Wingspan: 35" (890mm)
Wing Area: 600 sq in (38.7sq dm)
Weight: 34.2 - 38.2oz (970 - 1085g)
Wing Loading: 8.2 - 9.1 oz/sq ft (25 - 28 g/sq dm)
Length: 43" (1080mm)
Airfoil: Fully Symmetrical
Center of Gravity: 3-7/16" (87.5mm) back from the leading edge of the
bottom side of the top wing measured at the fuselage
Control Throws- High Rate Low Rate 3D
Elevator: Up & Down 9/16" (14mm) 5/16" (8mm) 1-1/4" (30mm)
Rudder: Right to Left 2-1/4" (57mm) 1-3/16" (30mm) 3-3/8" (87mm)
Ailerons: Up & Down 3/4" (20mm) 3/8" (10mm) 1-1/8" (28mm)

COMMENTS: Following are the colors of Top Flite MonoKote used to cover this
model and order numbers for six foot rolls;
Jet White, TOPQ0204
Metallic Teal, TOPQ0409
Metallic Plum, TOPQ0403

Próximos embarques a llegar a Mirax Hobbies